Single Stage Impulse Turbine: In this single stage impulse turbine the steam passes through the nozzle to increase the mass flow rate, this enters into the moving blade and exhausts into the condenser. In this stationary nozzle, the complete expansion is done and also decreases in enthalpy and increasing the kinetic energy is done in …
steam turbine classification 1) turbines: Impulse turbine. Reaction turbine. Impuls and reaction turbine. 2)Steam Flow directions: Axial steam flow. Radial steam flow.
Compare Jet Condenser and Surface Condenser: Jet Condenser: In Jet Condensers Cooling water get in contact/mix with the hot steam to condensate the steam. Jet condenser required a Low amount of water for circulation. Due to the steam and water comes in contact with each other impurities may present in it, so condensate cannot be …
About convergent-divergent nozzle and its function This is a type of both convergent and divergent nozzles the middle part of this known as the throat. At the convergent portion, it is known as the subsonic flow which is m<1 and at the middle part of it is known as the sonic flow which is m=1, …
About convergent-divergent nozzle and its function Read More »
Benson Boiler: Benson boiler is a high-pressure water tube boiler. it consist of same density of steam and water at critical pressure. in benson boiler steam generates in single pass (water) through it. By this, the bubble formation is easily eliminated and at this stage, without boiling of water it can form into steam. …
The Function of Boiler Mounting: The boiler is used for generating the steam, This is done at the desired temperature and pressure. Boiler Mountings: These mountings are used in boilers to control the steam generation process. Some of the examples of boiler mounting are as follows: Water level indicator: This is used to indicate the level …
Boiler Mountings, Explain Important Mounting of a Boiler Read More »
Calorific value: Calorific value is defined as the fuel of unit mass or volume is completely burnt at this process the amount of heat liberated is known as calorific value. Higher Calorific Value: It is defined as When the burnt of unit mass is done completely and the product of combustion should be cool down …
Define Higher Calorific Value, Lower Calorific Value and Equilibrium constant? Read More »
Rankine Cycle: Rankine Cycle is known as the thermodynamic cycle for the steam power plant. In this Cycle, the steam in the turbine is superheated and condensing it in condenser due to removing the limitations which are in the Carnot cycle. In this, the actual power cycle is obtained by the theoretical process. At evaporation …
Orsat Apparatus: The Orsat Apparatus is used to Analysis the products combustion, this is done by the process explained below. It consists of burette to measure and there are three flasks. There is a chemical in the flasks to absorb different types of gasses, like CO2, O2, CO. This flask has Potassium hydroxide (KOH), Pyrogallic acid which …
Heat Reaction: This is the process of heat adjustment, that it required to add or remove the amount of heat at the time of chemical reaction. This is done due to the presence of all the substance that should be involved at the same temperature. If there is the addition of heat required then it …
About Heat Reaction and Adiabatic Flame temperature Read More »